Safety Guidelines

All operators and nearby personnel must wear appropriate PPE at all times.

• Hard hat (ANSI/ISEA Z89.1 compliant)
• High-visibility safety vest (Class 2 or higher)
• Steel-toed boots with slip-resistant soles
• Safety glasses or goggles for dust/debris environments
• Hearing protection when operating diesel machinery
• Work gloves appropriate for the task

Before starting any equipment, conduct a thorough walk-around inspection.

• Check hydraulic hoses and connections for leaks
• Inspect tires/tracks for damage and proper inflation
• Verify all safety guards and covers are in place
• Test all controls, brakes, and steering before moving
• Check fluid levels: engine oil, hydraulic fluid, coolant
• Ensure fire extinguisher is accessible and charged

Follow all manufacturer instructions and OSHA standards during operation.

• Only trained and authorized personnel may operate equipment
• Never exceed the machine's rated capacity or reach limits
• Maintain a minimum 10-foot clearance from power lines
• Never operate under the influence of drugs or alcohol
• Use a spotter in congested or limited visibility areas
• Engage parking brake and lower attachments when leaving the cab

Establish clearly marked safety zones around all operating equipment.

• Barricade swing radius of excavators and cranes
• Use cones and caution tape to mark active work zones
• Assign a dedicated safety officer on large-scale projects
• Ensure all personnel are aware of equipment blind spots
• Prohibit unauthorized access to the operating area